\chapter{Materials and Methods}
\label{mat}
\section{Scientific background}
\label{mat:background}
    \subsection{BCIs}
        The idea of BCIs began to spread in the 1970s when Vidal published his paper (\cite{Vidal73}).\\
        First approaches used invasive BCIs earlier in Animals (rodents and monkeys) later also in humans. Invasive BCIs in humans were mostly implanted when the human was under brain surgery for another reason like therapy of epilepsy. Problems of invasive BCIs are the need to cut through skull and dura mater. This can lead to infections and severe brain damage.\\
        An improvement were less invasive BCIs with e.g. ECoG which is placed inside the skull but outside the dura which decreased the risk for infections massively.\\
        Measuring outside the skull entails even less risk, the dura and skull however lower the quality of the signal massively. With some improvements EEG has a spatial resolution of 2-3 cm (cf. \cite{Babiloni01}). This is quite bad compared to the single neuron one can observe with invasive methods. However we are more interested in the activity of areas then single cells for our task, so EEG meets our requirements here.\\
        In addition EEG is much cheaper and easier to use than other techniques. There is no need for surgery (like for invasive methods) and the hardware can be bought for less than 100\euro{} while FMRI hardware costs far above 100,000\euro{}. This is one of the reasons EEG is far more available than other techniques. There are some inventions of younger date but not as much work has been done with them why they aren't as well known and as far distributed as EEG.\\
        Another pro of EEG is that the device is head mounted. That means the user may move while measuring without high impact on the tracking of activity. This is highly necessary for any BCI used in daily life.
    \subsection{EEG}
        When using Electroencephalography (EEG) one measures the electrical fields on the scalp that are generated by activity of neurons in the brain. These measurements allow some interpretation about what is happening inside the skull. In our application we use the recorded currents directly to train a SVM or as predictor for regression.

        The foundation stone for EEG was laid in 1875 when Richard Caton found electrical activity around the brain of monkeys. After testing the methods on animals in 1924 the first human EEG was recorded by Hans Berger in Jena. He also coined the term Electroencephalography and is seen as the inventor of EEG.

        The frequencies typically used for movement prediction in EEG are about 8-24 Hz (\cite{Blokland15},\cite{Ahmadian13},\cite{Wang09}).
        EEG is often used for non-invasive BCIs because it's cheap and easier to use than e.g. fMRI. The electrodes have to be spread over the scalp. To allow for comparability there are standardized methods for this. These methods also bring a naming convention with them.
        \subsubsection{10-20 system}
            In this standard adjacent electrodes are placed either 10\% or 20\% of the total front-back or left-right distance apart. This standardization also makes it possible to name each electrode or rather here place. This is done with capital letters for lobes (Frontal, \qq{Central}, Parietal, Occipital and Temporal) and numbers for the specific place on the lobe. Even numbers are on the right side of the head, odd on the left; larger numbers are closer to the ears, lower numbers closer to the other hemisphere. The exact number now refers to the exact distance from centre: $$\left\lceil\frac{x}{2}\right\rceil\cdot \frac{d}{10}$$ where $x$ is the number and $d$ the diameter of the scalp. Electrodes in the centre are named with a lower case $z$ e.g. $Cz$.\\
            Electrodes between two lobes (10\% instead of 20\% distance) are named with the both adjacent lobes (anterior first) e.g. $FCz$ (between frontal and central lobe).
            Also see figure~\ref{fig:10-20}.
        \begin{figure}[!p]
            \centering
            \includegraphics[width=\textwidth]{eeg_electrodes_10-20.png}
            \caption{Full 10-20 system}
            \label{fig:10-20}
        \end{figure}
    \subsection{Power estimation}
        \subsubsection{EEG}
            To use data from EEG one way is to analyse the occurring frequencies and their respective power.\\
            To gain these from the continuous signal there are different methods. The intuitive approach would be to use Fourier transformation however the Fourier transform does not need to exists for a continuous signal. So we used power spectral density (PSD) estimation.
        \subsubsection{Power spectral density estimation}
            The PSD is the power per frequency. Power here refers to the square of the amplitude. %TODO: formulation, additional explanation?, fft
            If the Fourier transform is existing, PSD can be calculated from it e.g. as periodogram. If not it has to be estimated. One way to do so is parametrised with an Autoregressive model. Here one assumes that the there is a correlation between $p$ consecutive samples and the one following of the spectral density. This leads to an equation with only $p$ parameters which can be estimated in different ways. We used Burg's method (\texttt{pburg} from MATLAB library).
        \subsubsection{Burg's method}
        \label{mat:burg}
            Burg's method (\cite{Burg75}) is a special case of parametric PSD estimation. It interprets the Yule-Walker-Equations as least squares problem and iteratively estimates solutions.\\
            According to \cite{Huang14} Burg's method fits well in cases with the need of high resolution. %TODO: Autoregressive model vs. fft
    \subsection{Low Frequencies}
        In the 2000s there began a movement using new techniques to record ultrafast and infraslow brainwaves (above 50Hz and below 1Hz). These were found to have some importance (cf. \cite{Vanhatalo04}).\\
        Also in predicting movements there was found some significance in low frequency as was done by Liu et al. (\cite{Liu11}) and Antelis et al. (\cite{Antelis13}) for example. Antelis et al. found correlations between hand movement and low frequency signal of $(0.29,0.15,0.37)$ in the dimensions respectively.\\
        Lew et al. (\cite{Lew14}) state low frequencies are mainly involved in spontaneous self-induced movement and can be found before the movement starts. By this they may be a great possibility to lower reaction time of neuroprostheses for example.
        %TODO: more details (idea, possible explanantion)
    \subsection{Filtering}
        Filtering of the recorded EEG signal is necessary for different reasons. First there are current relics from 50Hz current. These can be filtered out with bandstop filters.\\
        Secondly we need to concentrate on the interesting frequencies (for classical EEG 1-50Hz). This is done by applying lowpass or highpass filters respectively. This is necessary because the PSD of lower frequency is a lot higher than that of higher frequencies. The relation $$PSD(f)=\frac{c}{f^\gamma}$$ holds for constants $c$ and $\gamma$ (\cite{Demanuele07}).\\
        The Butterworth filter (\cite{Butterworth30}) was invented by Stephen Butterworth in 1930. It's advantage was uniform sensitivity to all wanted frequencies. In comparison to other filters Butterworth's is smoother because it is flat in the pass band and monotonic over all frequencies. This however leads to decreased steepness meaning a higher portion of frequencies beyond cutoff.
    \subsection{EMG}
        When using muscles they are contracted after an signal via an efferent nerve activates them. Contraction of muscles also releases measurable energy which is used for Electromyography (EMG). There are intramuscular applications of EMG but we only used surface EMG.\\
        From surface EMG activity of muscles can be estimated however not very precisely without repetition. Since the muscles used for arm movements are quite large in our setting EMG allows relatively precise estimations of underlying muscle activity.

        EMG is mainly developed for diagnostic tasks. However it is also applicable in science to track muscle activity. %TODO?
    \subsection{Synergies}
        Movement of the arm (and other parts of the body) are under-determined meaning with given trajectory there are different muscle contractions possible. One idea how this problem could be solved by our nervous system are synergies. Proposed by Bernstein in 1967 (\cite{Bernstein67}) they describe the goal of the movement (e.g. the trajectory) instead of controlling single muscles. This would mean however that predicting the activity of single muscles from EEG is harder than predicting a synergy which in turn determines the contraction of muscles.\\
        Evidence for the use of synergies in the nervous system was found e.g. by Bizzi et al. (\cite{Bizzi08}) and Byadarhaly et al. (\cite{Byadarhaly12}). They also showed that synergies meet the necessary requirement to be able to build predictable trajectories.\\
        Synergies are usually gotten from EMG signal through a principal component analysis (PCA, cf. \ref{mat:pca}), non-negative matrix factorisation (NMF, cf. \ref{mat:nmf}) or autoencoders (a form of neuronal network, cf. \ref{mat:autoenc}).
    \subsection{PCA}
    \label{mat:pca}
        Principal Component Analysis (PCA) is probably the most common technique for dimensionality reduction. The idea is to use those dimensions with the highest variance to keep as much information as possible in the lower dimensional room.\\
        \begin{figure}
            \centering
            \includegraphics[width=0.6\textwidth]{GaussianScatterPCA.jpg}
            \caption{Eigenvectors of Gaussian scatter}
            \label{fig:pca}
        \end{figure}
    \subsection{NMF}
    \label{mat:nmf}
    \subsection{Autoencoders}
    \label{mat:autoenc}
        Autoencoders are a specific type of artificial neural networks (ANN). They work like typical ANNs by adjusting weights between the layers however they don't predict an unknown output but they predict their own input. What is interesting now is manipulating the size of the hidden layer where the size of the hidden layer has to be smaller than the input size. Now in the hidden layer the information of the input can be found in a condensed form (e.g. synergies instead of single muscle activity).\\
        Autoencoders have been successfully used by Spüler et al. to extract synergies from EMG (\cite{Spueler16}). Especially with a lower number of synergies autoencoders perform better than PCA or NMF because linear models fail to discover the agonist-antagonist relations that are typical for muscle movements. These however can be detected by autoencoders which allows for good estimations with half the synergies.
\section{Experimental design}
    The data used for this work were mainly recorded by Farid Shiman, Nerea Irastorza-Landa, and Andrea Sarasola-Sanz for their work (\cite{Shiman15},\cite{Sarasola15}). We were allowed to use them for further analysis.\\
    There were 9 right-handed subjects%TODO
    All the tasks were performed with the right hand.\\
    To perform was a centre-out reaching task to one of four targets (see \ref{fig:experimentalDesign}) while 32 channel EEG, at least%
    \footnote{\texttt{'AbdPolLo', 'Biceps', 'Triceps', 'FrontDelt', 'MidDelt'} and \texttt{'BackDelt'} were recorded for every subject, others only in some. Only the 6 channels tracked in every session were used}%
     6 channel surface EMG and 7 DOF kinematics were tracked.
    \begin{figure}
        \centering
        \includegraphics{experimentalDesign.jpg}
        \caption{Centre-out reaching task with four colour-coded targets}
        \label{fig:experimentalDesign}
    \end{figure}
    Of the kinematic information tracked we only used position ($x,y$) and angle ($\theta$, rotation around $z$-axis) of the hand.\\
    Only complete sessions were used in our analysis to ensure better comparability.\\
    One session consists of 5 runs with 40 trials each. The trials were separated by resting phases of varying length (2-3s, randomly assigned). Each trial began with an auditory cue specifying the random but equally distributed target for this trial. This leads to 50 reaches to the same target each session.
    After the cue the participants should \qq{perform the movement and return to the starting position at a comfortable pace but within 4 seconds}\footnote{\cite{Shiman15}}\\
    For each subject there were 4 to 6 sessions, each recorded on a different day. All in all there were 255 runs in 51 sessions. Each session was analysed independently as one continuous task.